Syncwire Magnetic Ring Holder Review: Does It Beat a PopSocket?
A look at the Syncwire MagSafe ring holder that grips your phone and folds out into a kickstand, plus how it stacks up against a PopSocket.
As an Amazon Associate I earn from qualifying purchases.
The Syncwire magnetic ring holder solves the one thing I never liked about a PopSocket: it’s not glued to your phone forever. Because it grabs on with a MagSafe magnet, you pop it off in a second and slide the phone flat into your pocket, then snap it right back when you want a grip. That alone makes it worth a look if you’ve ever peeled a sticky grip off a case and left a gummy ring behind. You can grab the Syncwire magnetic ring holder here if you want to skip ahead.
Quick Verdict
The Syncwire magnetic ring holder does two jobs a PopSocket can’t: it snaps off with the magnet when you don’t want it, and it folds flat into a 360° kickstand when you do. If you already run a MagSafe case, it’s the easiest grip upgrade to try.
Buy if you:
- Already use a MagSafe case or MagSafe-compatible phone
- Want a finger grip that also props the phone up to watch video
- Hate the permanent stuck-on feel of a PopSocket
- Like that it sticks to metal surfaces like a fridge or locker
Skip if you:
- Have a thick or non-MagSafe case, the magnet grip weakens fast through anything bulky
- Want it to wirelessly charge through the ring, this is a grip, not a charger
- Prefer a soft grip, the metal build is firm, not cushioned
| Attachment | MagSafe magnetic (snap-on) |
|---|---|
| Ring rotation | 360° rotating |
| Build | Metal construction |
| Doubles as | Kickstand |
| Bonus | Sticks to metal surfaces |
| Works with | MagSafe cases + MagSafe phones |
A Grip You Can Take Off Whenever You Want
That framing holds up. The ring snaps on, loops around your finger, flips into a kickstand, and clings to metal surfaces, four distinct uses from one piece of metal you can pull off in a second.
What the Syncwire Magnetic Ring Holder Actually Is
It’s a metal ring that snaps onto the back of a MagSafe phone or case and flips out into a finger loop or a kickstand. The ring rotates a full 360°, so you can angle the phone landscape for video or portrait for scrolling without repositioning your whole hand. The metal build gives it a more premium feel than the plastic collapsible grips most people are used to.
The magnet is the headline. It uses the same MagSafe ring that powers wireless chargers and car mounts, so it lines up automatically and holds without any adhesive. And because the outside is metal, it’ll also cling to a fridge, a filing cabinet, or any magnetic surface if you want to prop the phone up somewhere hands-free.
The Kickstand Is the Part I’d Use Most
The kickstand is the real differentiator, it lets you set any viewing angle, whereas a plain ring grip doesn’t prop the phone at all. Flip the ring out, set the phone down, and you’ve got a stand for watching video at your desk or following a recipe on the counter. The 360° rotation means you can dial in the exact viewing angle instead of being stuck with one fixed tilt.
As a grip it works, but the metal ring is an adjustment if you’re used to a PopSocket’s squishy button. There’s no give, your finger sits in a firm hoop. That’s not a flaw, it’s a different feel, and after a few minutes it reads as sturdy rather than uncomfortable.
Where the Magnet Gets Fussy
MagSafe accessories are only as strong as what’s between the magnet and the phone. On a bare MagSafe phone or a proper MagSafe case, the hold is confident. Put a thick, non-MagSafe case in the way and the magnet has to fight through all that plastic, and the grip gets weaker than you want for something you’re dangling off one finger. That’s not a Syncwire flaw so much as how every MagSafe grip behaves, but it’s the thing to know before you buy: this needs a real MagSafe setup to feel secure.
The other small catch is that the ring doesn’t charge through it. It’s a grip and stand, not a charging pad, so you’re still plugging in or setting the phone on a separate charger.
Get it now
Syncwire Magnetic Ring Holder
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases.
Who This Is Actually For
This is for the MagSafe crowd. If your phone or case already snaps onto a MagSafe charger, this replaces the need for a PopSocket without leaving adhesive residue. The kickstand earns its keep at a desk, flip the ring out, set the phone at an angle, and you’ve got a hands-free screen without propping it against a mug. That’s the moment a PopSocket can’t match, because a PopSocket grip won’t hold the phone upright on its own.
It’s also handy for people who bounce their phone between a car mount and their hand all day. Because it’s magnetic and metal, you can stick it to surfaces you’d never expect a phone to hold onto. If you don’t run MagSafe at all, though, this isn’t the accessory that changes your mind about it.
Syncwire Ring Holder vs a PopSocket
A PopSocket wins on one thing: the squishy button grip that a lot of people just prefer to hold. It also works on any phone or case with adhesive, no MagSafe required. That’s the trade-off in the PopSocket’s favor, and it’s a real one.
The Syncwire flips the script everywhere else. It comes off clean whenever you want, it doubles as a rotating kickstand, and the metal build feels more premium than a plastic PopSocket. If you like the idea of a grip that isn’t permanently stuck to your case, the ring holder is the more flexible tool.
Advice Before You Buy
Check your case first. If it says MagSafe on the box, you’re set. If it doesn’t, either grab a MagSafe case or accept that the magnet grip will feel weaker through non-MagSafe plastic. That single detail decides whether you love this or return it.
Beyond that, treat the metal ring like the finger grip it is, not a phone leash. The magnet is strong for a MagSafe hold, but no magnetic grip is drop-proof, so keep a finger through the loop when you’re carrying it around.
Pros
- Snaps on and off cleanly with the MagSafe magnet, no sticky residue
- 360° rotating ring lets you set any viewing angle
- Doubles as a kickstand for video and recipes
- Metal build feels more premium than a plastic grip
- Sticks to metal surfaces like a fridge or locker
Cons
- Magnet grip weakens through thick or non-MagSafe cases
- No wireless charging through the ring
- Firm metal ring instead of a soft, cushioned grip
Frequently Asked Questions
Does the Syncwire ring holder work without a MagSafe case?
Not well. It’s built around the MagSafe magnet, so it needs a MagSafe phone or MagSafe-compatible case to hold securely. On a thick standard case the magnet has to reach through too much plastic and the grip feels loose.
Can you still wirelessly charge with it attached?
It depends on your charger and where the ring sits. The ring covers the MagSafe zone on the back, so you’ll usually want to pop it off before setting the phone on a wireless charger. It’s a grip, not a charging pass-through.
Will it scratch my phone or case?
It shouldn’t, since it attaches by magnet rather than adhesive and lines up on the MagSafe ring. Just keep grit off the contact surface so nothing gets trapped between the metal and your case.
Does the ring fold flat enough to fit in a pocket?
Yes, the ring folds down against the back of the phone when you’re not using it. And since it’s magnetic, you can pull it off entirely for the flattest possible profile before pocketing the phone.
Can it hold the phone on a metal surface hands-free?
Yes, the metal exterior lets it cling to magnetic surfaces like a fridge, a car dash panel, or a metal locker. It’s a handy bonus for propping the phone up somewhere without a stand.
Is it a good grip for larger phones?
For MagSafe-equipped large phones, yes, the finger loop gives you a solid hold on a big slab of glass. The stronger the MagSafe connection, the more confident it feels, so a bare phone or a proper MagSafe case matters more on heavier models.
How does it compare to a car MagSafe mount?
Different tools. This is a grip and kickstand, not a mount, but it uses the same MagSafe ring, so it doesn’t fight with most MagSafe car mounts. You may need to remove it depending on how your mount grabs the phone.
Do I need to replace anything over time?
There’s nothing consumable to replace, no adhesive pads to swap out like a stick-on grip. The magnet and metal ring are the whole product, so upkeep is basically wiping it clean now and then.
Clicking takes you to Amazon. As an Amazon Associate we earn from qualifying purchases — pricing and availability subject to change.
Get it now
Syncwire Magnetic Ring Holder
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases.
