iOttie Velox Qi2 Mini Wireless Charging Car Mount Review
The iOttie Velox Mini is a compact Qi2 car mount with true 15W MagSafe-style charging, strong N52 magnets, and the car adapter in the box.
As an Amazon Associate I earn from qualifying purchases.
Quick Verdict
15W of true Qi2 charging out of a mount barely bigger than the phone’s magnet ring, and the car adapter is in the box. The Velox Mini snaps on, holds through rough roads, and doesn’t hog dash space. If a clean, fast wireless setup is what you’re after in the car, this is an easy one to like.
Buy if you:
- Own an iPhone 12 through 17 and want true 15W Qi2 speeds
- Hate bulky mounts crowding your air vent
- Want the car adapter included, not a separate purchase
- Drive rough roads and need a magnet that won’t let go
Skip if you:
- Have an air vent with slats too thin or awkward for the silicone prongs to bite
- Use a thick, non-MagSafe case that weakens magnetic pull
- Want a suction-cup dash mount instead of a vent mount
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
The Velox Mini Fixes the One Thing I Hated About Car Chargers
I’ve never found a wireless car mount that wasn’t oversized until the iOttie Velox Mini landed on my dashboard. The iOttie Velox Mini is the first Qi2 car charger that feels sized right, barely larger than the MagSafe ring on the back of the phone. It’s a MagSafe-style magnetic mount that pushes true 15W wireless charging, and it clips onto your air vent in seconds. That’s the whole pitch, and for once the pitch matches the product.
Qi2 is the reason this matters for iPhone users. Older wireless car chargers capped out slower and relied on you lining the phone up just right. Qi2 borrows the MagSafe magnet approach, so the phone snaps into the sweet spot every time and pulls the full 15W. No fiddling, no “why isn’t it charging” at a red light.
What’s Actually in the Box
The Velox Mini ships with the mount, the air vent bracket, and a 20W USB-C car adapter. That last part is bigger than it sounds. Plenty of chargers in this space make you supply your own power brick, then quietly underperform when it’s not rated high enough. iOttie includes a 20W adapter that can feed the full 15W, so you’re not guessing whether your old cigarette-lighter plug is holding you back.
Installation Takes About Ten Seconds
You slide the siliconized prongs onto an air vent blade and it grips like a vise. There’s no adhesive, no drilling, no dashboard pad to peel and regret later. The silicone coating does double duty here, giving the vent grip more bite while keeping the plastic blades from getting scratched up.
Once it’s on, the ball joint lets you rotate, swivel, and tilt the face so the phone sits where you can glance at your maps without leaning. For a mount this small, having a real ball joint instead of a fixed angle is the difference between usable and annoying.
The Magnetic Hold Is the Star
The N52 magnets are what sell this thing. They’re strong enough that the phone stays locked in position over rough roads, which is exactly where cheaper magnetic mounts drop your phone into the footwell. Snap the iPhone on and it clicks into the charging sweet spot automatically, so you’re getting the full 15W without hunting for alignment.
That’s the quiet advantage of Qi2 over the old Qi car chargers. With the magnet doing the aligning, charging efficiency stays high because the coils are always centered. No slow trickle because your phone slid half an inch off the pad.
The One Thing to Watch Before You Buy
Air vent mounting lives and dies by your vents. The silicone prongs clamp onto a vent blade, and if your car has unusually thin, delicate, or vertically-oriented slats, that vise grip has less to hold onto. It’s not a flaw in the mount so much as a reality of every vent-style charger, and it’s worth a look at your dash before committing.
The other thing is case thickness. Qi2 and MagSafe magnets are strong, but a thick, non-MagSafe case adds distance and mush between the magnets. If your case doesn’t have magnets built in, the hold weakens and charging can slow. A proper MagSafe or MagSafe-compatible case fixes it.
Get it now
iOttie Velox Mini Qi2 Car Charger
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases.
Who This Is For
If you’ve got a MagSafe iPhone and you’re still threading a cable across the center console every morning, the Velox Mini is the specific thing that ends that habit. Snap the phone on, it locks to the magnet ring, and it’s charging before you’ve pulled out of the driveway. Daily commuters especially benefit: a long navigation session that would drain the battery instead keeps it topped up the whole drive.
If you drive an older car with a beat-up cigarette-lighter port and no fast charging, the included 20W adapter means you don’t have to shop for a power brick separately. That’s handy for anyone who doesn’t want to research USB-C wattage ratings just to charge a phone.
Velox Mini vs a Plain MagSafe Mount
The alternative most people cross-shop is a magnetic car mount that holds the phone but doesn’t charge it, paired with your own cable. That combo is cheaper up front. But you’re back to plugging in a cable every trip, and you lose the tidy single-piece setup.
A passive mount wins on two counts: it works with any phone regardless of magnets, and a thick case never costs you anything. But you’re still plugging in a cable every trip and managing two separate pieces. The Velox Mini collapses that into one: mount, charger, and adapter all accounted for. If you’re cross-shopping on price alone, the passive mount is cheaper. If you actually want 15W wireless and a clean dash, the passive mount just moves the problem around.
Advice Before You Install It
Three things decide whether this mount works perfectly or just okay. First, check your vent blades before it ships: thin vertical slats are the one physical deal-breaker the Velox Mini can’t solve. Second, use the included 20W adapter, swapping in an old 10W cigarette-lighter plug is the fastest way to turn a 15W charger into a 7.5W charger. Third, if you run a case, make it a MagSafe-compatible one; a thick non-magnetic case is the difference between a firm, confident snap and a hold that feels like it might give on a pothole. Nail those three and the mount does the rest.
Pros
- True 15W Qi2 charging in a mount barely bigger than the phone’s magnet ring
- 20W USB-C car adapter included, no separate brick to buy
- Strong N52 magnets hold through rough roads and auto-align for full-speed charging
- Ten-second air vent install, no adhesive or dash pad
- Ball joint gives real rotate, swivel, and tilt adjustment
Cons
- Vent-mount grip depends on your car’s vent design; thin or vertical slats are trickier
- Thick, non-MagSafe cases weaken the hold and can slow charging
- Vent-only mounting, so there’s no suction-cup dash option in the box
Frequently Asked Questions
Does the Velox Mini work with Android phones?
Yes, as long as the Android phone is Qi2-compatible with the magnet ring. The mount is designed around Qi2 and MagSafe, so a phone without built-in magnets won’t snap on or align properly. Some Android phones need a Qi2 magnetic case to work with it.
Will it fit my car’s air vent?
Most horizontal vent blades work fine because the silicone prongs slide on and grip tight. Cars with very thin, delicate, or vertical slats are the ones to check before buying. Take a quick look at your dash vents first.
Do I need to buy a separate power adapter?
No, iOttie includes a 20W USB-C car adapter in the box. It’s rated high enough to feed the full 15W, so you don’t need to source your own. Just plug it into your car’s power port and go.
Does it charge through a case?
Yes, through MagSafe and MagSafe-compatible cases without issue. Thick cases without built-in magnets are where you’ll see weaker hold and slower charging. Stick with a magnetic case for best results.
Is 15W actually faster than my old wireless car charger?
Yes for most Qi2 iPhones, because older Qi car chargers often capped lower and lost speed when the phone drifted off-center. The magnetic alignment here keeps the coils centered, so you keep the full rate. It’s a noticeable step up over standard Qi.
Can it hold a large iPhone Pro Max on bumpy roads?
Yes, the N52 magnets are strong enough to keep even a larger iPhone locked in place over rough roads. That magnet strength is the whole point of the design. A MagSafe case makes the grip even more secure.
Does the phone block the air vent when it’s mounted?
Partly, like any vent mount, since the charger clamps onto a vent blade. Because the Velox Mini is so compact, it covers less of the vent than bulkier mounts. You can still run other vents for airflow.
Is there any monthly fee or app required?
No, it’s a plug-and-charge accessory with no app or subscription. You install it, plug in the adapter, and snap your phone on. Nothing to sign up for.
Get it now
iOttie Velox Mini Qi2 Car Charger
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases.
